ICONX - FIRE TRUCK MMS115

$19.99
Metal Earth

Fire engines are specifically designed to fight fires and often include a larger telescopic-ladder mounted on a turntable at the back of the truck's chassis. Most also include a water tank with an onboard pump, a fire hose, an aerial ladder and multiple ground ladders.
These amazingly detailed DIY models start as 4” square steel 3D models. Simply snip out the pieces and bend the tabs through corresponding connection points. Easy to follow instruction included. Tweezers or small needle nose pliers are suggested to facilitate assembly.
2 sheets of metal


ICONX - FOKKER D-VII MMS005

$11.99
Metal Earth

Manfred von Richthofen praised this aircraft as the best he had flown. It offered excellent performance, yet it was safe and easy to fly. Richthofen's recommendation led to the first provisional order for 400 production aircraft. In all, Germany produced around 3,300 D-VII aircraft in summer and autumn of 1918.
These amazingly detailed DIY models start as 4” square steel 3D models. Simply snip out the pieces and bend the tabs through corresponding connection points. Easy to follow instruction included. Tweezers or small needle nose pliers are suggested to facilitate assembly.
1 sheet of metal


ICONX - FORD - 1908 MODEL T - RED MMS051C

$24.99
Metal Earth

The Ford Model T was the first automobile mass produced on moving assembly lines with completely interchangeable parts, marketed to the middle class. This car had 2 forward gears, a 20 horsepower engine and no driver doors.
These amazingly detailed DIY models start as 4” square steel 3D models. Simply snip out the pieces and bend the tabs through corresponding connection points. Easy to follow instruction included. Tweezers or small needle nose pliers are suggested to facilitate assembly.
2 sheets of metal


ICONX - FORD - 1910 MODEL T MMS196

$21.99
Metal Earth

The Ford Model T was the first automobile mass produced on moving assembly lines with completely interchangeable parts, marketed to the middle class. This car had 2 forward gears, a 20 horsepower engine and no driver doors.
These amazingly detailed DIY models start as 4” square steel 3D models. Simply snip out the pieces and bend the tabs through corresponding connection points. Easy to follow instruction included. Tweezers or small needle nose pliers are suggested to facilitate assembly.
2 sheets of metal


ICONX - FORD - 1925 TURNABOUT MMS207

$21.99
Metal Earth

The Model T was Ford's first automobile mass-produced on moving assembly lines with completely interchangeable parts, marketed to the middle class.
These amazingly detailed DIY models start as 4” square steel 3D models. Simply snip out the pieces and bend the tabs through corresponding connection points. Easy to follow instruction included. Tweezers or small needle nose pliers are suggested to facilitate assembly.
2 sheets of metal


ICONX - FORD - 1931 MODEL A MMS197

$25.99
Metal Earth

The Ford Model A was the Ford Motor Company's second market success after its predecessor, the Model T. First produced on October 20, 1927, but not introduced until December 2, it replaced the venerable Model T, which had been produced for 18 years.
These amazingly detailed DIY models start as 4” square steel 3D models. Simply snip out the pieces and bend the tabs through corresponding connection points. Easy to follow instruction included. Tweezers or small needle nose pliers are suggested to facilitate assembly.
2 sheets of metal


ICONX - FORD - 1932 COUPE MMS198

$23.99
Metal Earth

The Model 18 coupe with its more powerful V8 engine was more popular than the four-cylinder Model B coupe. In the 1940s, the '32 Ford became an ideal motor vehicle that has been easy to modified to give it extra power and speed, being plentiful and cheap enough for young men to buy, and available with a stylish V8 engine. Rodders would strip weight off this readily available car and "hop up" or customize the engine.
These amazingly detailed DIY models start as 4” square steel 3D models. Simply snip out the pieces and bend the tabs through corresponding connection points. Easy to follow instruction included. Tweezers or small needle nose pliers are suggested to facilitate assembly.
2 sheets of metal


ICONX - FORD - 1937 PICKUP TRUCK MMS199

$21.99
Metal Earth

The 1937 Ford featured a more rounded look with fine horizontal bars in the convex front and hood-side grilles. The front grille was V-shaped, rather than following the fenders into a pentagon shape, as on the 1936 model. Faired-in headlights were a major modernization found on both the Standard and DeLuxe trim versions, though much of the rest of the design was shared between Ford's two lines. A larger water pump was used to help aid in cooling.
These amazingly detailed DIY models start as 4” square steel 3D models. Simply snip out the pieces and bend the tabs through corresponding connection points. Easy to follow instruction included. Tweezers or small needle nose pliers are suggested to facilitate assembly.
2 sheets of metal


Showing 55 to 63 of 180 (20 Pages )